Produktsökning

Hot Swap SATA/SAS Backplane RAID Bays – 3 Hard Drive Mobile Rack

Hot Swap up to three 3.5in SAS or SATA hard drives in and out of this removable backplane; features 3-in-2 design, that requires only two 5.25in drive bays

Produkt ID: SATSASBAY3BK

  • Fully supports SAS revision 1/2 (3.0/6.0 Gbps) hard drives and controllers
  • Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
  • Supports 2.5" and 3.5" form factor SAS or SATA hard drives
Ditt pris
€121,99 EUR excl. VAT
€152,49 EUR incl. VAT

The SATSASBAY3BK SAS/SATA Backplane offers an easy-to-use and cost-effective SATA hot swap solution and features a sturdy and compact 3-in-2 design that lets you install up to three 2.5"/3.5" SATA or SAS hard drives into only two 5.25in bays.

With support for SATA/SAS HDD the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.

To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.

The SATSASBAY3BK is backed by a StarTech.com 2-year warranty and free lifetime technical support.

 

Användning

  • Add additional hot-swap bays to a server or workstation computer
  • Replace or upgrade old IDE or SATA backplanes with a SAS/SATA backplane
  • Backup systems where physically removing the backed up data from the system is required
  • Be able to replace/remove individual drives from a storage array with minimal or no system down time

Fördelarna med StarTech.com

  • Full support for both SAS and SATA drives enables the right type of drive for any application to be used
  • Aluminum construction with an 80mm cooling fan ensures optimal heat dissipation for all of the drives
  • Built-in audible warnings and LED status indicators keep you aware of the status of the drives at all time
  • Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller

Partnernummer

  • UPC 065030836630

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Length 25,4 cm [10,0 in]
Package Width 12,3 cm [4,8 in]
Package Height 19,0 cm [7,5 in]
Fraktvikt (förpackning) 1,4 kg [3,2 lb]
Hårdvara Rättsliga godkännanden UL94 V-0 Rated
Antal enheter 3
Enhetsstorlek 2.5in & 3.5in
Enhetstyp SAS & SATA
1 - Flaktar 80 mm
Indikatorer 1 - LED-indikatorer Over Heating Alarm (Flashing Red - Temperature Warring, Reset sensor and alarm)
3 - LED-indikatorer Hard Drive Indicator (Green - Power, Orange/Red Blinking - Activity)
Kontakt(er) 3 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
2 - Värdkontakter SATA data- & ström-kombo (7+15-stifts)
1 - Värdkontakter SATA (7-stifts, data)
2 - Värdkontakter LP4 (4-stift, Molex-type Large Drive Power)
Miljö Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -15°C to 75°C (-59°F to 167°F)
Luftfuktighet 90% RH at 30°C
Prestanda Hot swap-förmåga Ja
Temperaturlarm Ja
Särskilda anmärkningar/krav System- och kabelkrav Two free 5.25" drive bays
3 x Available SAS or SATA ports
Obs. If using SFF-8484 SAS controller for SAS Hard Drives, use StarTech.com SAS cable SAS84S450
Utseende Färg Svart
Kabinettyp Aluminium och stål
Av plast
Produktlängd 20,2 cm [8,0 in]
Produktbredd 14,6 cm [5,7 in]
Produkthöjd 86,0 mm [3,4 in]
Produktvikt 1,2 kg [2,7 lb]
Vad det är i lådan 1 - Ingår i paketet SAS/SATA Backplane
Package of assemble screws
Instruction Manual

Tillbehör

SATSASTRAYBK

Extra 2.5in or 3.5in Hot Swap Hard Drive Tray for SATSASBAY3BK

Keep extra hard drives ready for use with the SATSASBAY3BK

Ditt pris
€31,99 EUR excl. VAT
€39,99 EUR incl. VAT
Utgått
PCISATA4R1

PCI SATA RAID-kontrollerkortadapter med 4 portar

Lägg till 4 SATA-portar till din PC via en utbyggnadskortplats för PCI som stödjer högpresterande RAID-array installation

Ditt pris
€58,99 EUR excl. VAT
€73,74 EUR incl. VAT
SATA36RA1

36in SATA to Right Angle SATA Serial ATA Cable

Make a right-angled connection to your SATA drive, for installation in tight spaces

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
SATA36

36in SATA Serial ATA Cable

Connect and position SATA drives easily - designed for larger cases

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
Utgått
LSATA24RA2

24in Right Angle Latching SATA Serial ATA Cable

A space-saving, latching right angle SATA hard drive cable, for installations in tight spaces.

Ditt pris
€4,64 EUR excl. VAT
€5,80 EUR incl. VAT
LSATA24

24in Latching SATA Cable

SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
SATA24

60 cm SATA seriell ATA-kabel

Denna högkvalitativa SATA-kabel är framtagen för att kunna ansluta SATA-enheter även i trånga utrymmen.

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
Utgått
SATA24POW

24in SATA Serial ATA Data and Power Combo Cable

Power your Internal SATA hard drive from an LP4 / Molex connector on your Power Supply

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
SATA18POW

18in SATA Serial ATA Data and Power Combo Cable

Power your Internal SATA hard drive from an LP4 connector on your Power Supply

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
PYO1LP4SATA

6in LP4 to LP4 SATA Power Y Cable Adapter

Power a SATA device and an LP4 device from a single LP4 power supply connector

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
LP4SATAFM

SATA till LP4 strömkabeladapter

Strömförse en IDE-hårddisk från en SATA-strömanslutning

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
SAS84S450

50cm Serial Attached SCSI SAS Cable - SFF-8484 to 4x SATA

Connect a SATA/SAS Controller to 4 SATA drives

Ditt pris
€51,99 EUR excl. VAT
€64,99 EUR incl. VAT
Utgått
PEXSATA24E

PCI Express x4 SATA-kontrollerkortadapter med 2 portars eSATA och 4 portars SATA II

Lägg till 2 externa SATA- (eSATA) och 4 interna SATA-portar till din stationära dator genom en PCI-Express-utbyggnadskortplats

Ditt pris
€104,21 EUR excl. VAT
€130,26 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • SATA and SAS cables
  • Hard drives
  • Hard drive rack

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive rack in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive rack in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive rack, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter.  Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, it needs to be formatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  • If the hard drive is listed as healthy but does not have a drive letter assigned to it, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Before You Buy

Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the hard drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.

For further information about SAS and SATA interoperability, refer to the following FAQ: http://www.startech.com/faq/hard_drive_controllers_sas_drive_compatibility.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen