Produkt ID: SM21BMU31CI3
Lägg till högpresterande extern datalagring till din USB-C-kompatibla bärbara dator, surfplatta eller stationära dator med denna SATA M.2 SSD-inneslutning. Den låter dig använda din SATA M.2-enhet som en ultrasnabb extern lagringslösning över en USB 3.1 Gen 2-anslutning. Den är idealisk för din MacBook, Dell XPS, Chromebook Pixel eller annan USB Type-C-enhet.
Den kompakta M.2 SATA till USB-adaptern är lätt och portabel och ger dig höghastighetsåtkomst till dina data var du än är. Den integrerade USB-C-kabeln (15,2 cm) gör att du alltid har möjlighet att koppla in den utan att behöva komma ihåg att ta med en kabel.
Den kraftiga inneslutningen i aluminium och plast omger din M.2 SATA SSD och erbjuder inbyggd ventilation som förbättrar värmeavledningen för att hålla din enhet vid en lämplig temperatur.
Använd enkelt din M.2 SATA-enhet som extern datalagring. Denna M.2 NGFF SSD-inneslutning erbjuder en enkel anslutning till din M.2 SATA SSD över USB 3.1 Gen 2. Du kan snabbt och utan flaskhalsar föra över filer med en SATA M.2 SSD som din externa enhet.
Inneslutningen stöder vanliga M.2 SATA SSD-enheter och flera enhetslängder, inklusive: 42 mm (2242), 60 mm (2260), och 80 mm (2280). Inneslutningen för USB till M.2 SATA fungerar med USB-C-värdenheter och är också kompatibel med Thunderbolt 3 USB-C-portar.
SM21BMU31CI3 täcks av StarTech.coms tvåårsgaranti och gratis livstidsgaranti på teknisk support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Förpackning | Package Height | 30,0 mm [1,2 in] |
Package Length | 17,5 cm [6,9 in] | |
Fraktvikt (förpackning) | 188,0 g [6,6 oz] | |
Package Width | 14,5 cm [5,7 in] | |
Hårdvara | Gränssnitt | USB 3.1 Gen 2 |
Busstyp | USB 3.1 Gen 2 | |
Antal enheter | 1 | |
Enhetsstorlek | 22mm - M.2 SATA | |
Enhetstyp | M.2 (SATA, B-Key, NGFF) | |
Enhetsinstallation | Fixerad | |
Enhetstyp | M.2 SATA (NGFF, B+M-Key) | |
Stödda enhetshöjd(er) | 2242 | |
2260 | ||
2280 | ||
Chipset-ID | JMicron - JMS580 | |
Indikatorer | 1 - LED-indikatorer | Ström & aktivitet |
Kontakt(er) | 1 - Enhetskontakter | M.2 (SATA, B-Key, NGFF) |
1 - Värdkontakter | USB Type-C (24-stifts) USB 3.1 (10 Gbps) | |
Miljö | Drifttemperatur | 5°C to 35°C (41°F to 95°F) |
Förvaringstemperatur | -20°C to 50°C (-4°F to 122°F) | |
Luftfuktighet | 20% ~ 80% RH | |
Mjukvara | OS-kompatibilitet | Operativsystemsoberoende, varken programvara eller drivrutiner behövs |
Prestanda | Maximal dataöverföringshastighet | 6 Gbps |
Typ och hastighet | USB 3.1 Gen 2 - 10 Gbit/s | |
UASP-stöd | Ja | |
Typ och hastighet | SATA III (6 Gbps) | |
TRIM Support | Ja | |
Medeltid mellan fel (MTBF) | 50 000 timmar | |
Allmänna specifikationer | Ej kompatibel med M.2 NVMe eller AHCI PCI-Express SSD-enheter | |
Ström | Power Source | Strömförsörjd via USB |
Särskilda anmärkningar/krav | Obs. | Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices. |
Utseende | Produkthöjd | 13,0 mm [0,5 in] |
Produktlängd | 11,0 cm [4,3 in] | |
Produktvikt | 105,0 g [3,7 oz] | |
Produktbredd | 50,0 mm [2,0 in] | |
Färg | Svart | |
Kabinettyp | Aluminium | |
Kabellängd | 16 cm [6,3 in] | |
Vad det är i lådan | 1 - Ingår i paketet | M.2 SATA-kabinett med inbyggd USB-C-kabel |
Skruvmejsel | ||
4 - Ingår i paketet | monteringsskruvar | |
1 - Ingår i paketet | paket med monteringsutrustning för hårddisk | |
snabbstartsguide |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.
Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.
Navigate to Disk Management.
When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.
Click OK.
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.
Right-click Unallocated or RAW volume, and select New Simple Volume.
In the New Partition Wizard, click Next.
Select Primary partition.
Leave the partition size set to default, and click Next.
Assign a drive letter or leave it set to the default, and click Next.
Enter the following settings to format the partition:
The new drive should appear in Windows Explorer.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.
To create a partition on a new drive, complete the following:
Open Finder.
Navigate to Applications and click Utilities.
Open Disk Utility.
Select the new drive and click the Partition tab.
Click Options and verify that it is set to GUID Partition Table.
Enter a name for the partition.
Click Partition.
The drive should now be accessible in Finder.