Bärbar SuperSpeed mini USB 3.0-hubb med 4 portar - Svart

Lägg till fyra externa USB 3.0-portar till din bärbara dator eller Ultrabook™ med en smal portabel hubb

Produkt ID: ST4300MINU3B

  • Fyra USB-portar av typ A som kan användas samtidigt
  • SuperSpeed USB 3.0-kompatibel med dataöverföringshastigheter på upp till 5 Gbps
  • Bakåtkompatibel med USB 2.0- och 1.0/1.1-specifikationer och -enheter
Ditt pris
€28,99 EUR excl. VAT
€36,24 EUR incl. VAT

Den ST4300MINU3B bärbara SuperSpeed mini USB 3.0-hubben (svart) med 4 portar ger dig flera USB-anslutningar genom att göra om en enda USB 3.0-port till fyra externa USB 3.0-portar. Designen med den inbyggda kabeln gör denna mini USB-hubb till det perfekta tillbehöret för din bärbara Mac®/PC eller Ultrabook™.

USB 3.0-hubben med 4 portar stöder USB 3.0-databandbredd (5 Gbps - upp till 10x snabbare än USB 2.0) och är bakåtkompatibel med USB 2.0- och 1.1-enheter för garanterad felfri prestanda från alla dina USB-tillägg/-enheter oavsett hur gamla de är.

Den externa USB 3.0-hubben är idealisk för hemma- och kontorsanvändare som kräver bärbarhet, är USB-driven och har en kompakt design med en inbyggd kabel så att inga extra kablar behövs för att ansluta hubben till systemet.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Idealisk för i stort sett alla USB 3.0-utrustade bärbara datorer, som till exempel din Ultrabook™, Dell™ Precision 5510, Dell XPS 13, Dell XPS 15 och Dell Precision 3510
  • Gör svårnådda USB-portar mer lättillgängliga genom att placera hubben var du vill dit kabeln når
  • Separata USB-portar för att passa större USB-kontakter och förhindra trängsel

Fördelarna med StarTech.com

  • Anslut upp till fyra USB 3.0/2.0/1.x-enheter samtidigt med deras maximala hastigheter
  • Kompakt design med en inbyggd kabel för enkel användning och bärbarhet

Partnernummer

  • Ingram Micro Sweden V932776
  • ALSO Sweden 000000000002764076
  • UPC 065030850940

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 40 mm [1.6 in]
Package Length 13 cm [5.1 in]
Fraktvikt (förpackning) 120 g [4.2 oz]
Package Width 16.5 cm [6.5 in]
Hårdvara USB-C-enhetsport(ar) Nej
USB-C-värdanslutning Nej
Snabbladdningsport(ar) Nej
Portar 4
Gränssnitt USB 3.0
Busstyp USB 3.0
Chipset-ID Genesys Logic - GL3522
Indikatorer 1 - LED-indikatorer Ström
Kontakt(er) 1 - Externa portar USB Type-A (9-stifts) USB 3.0 (5 Gbps)
4 - Externa portar USB Type-A (9-stifts) USB 3.0 (5 Gbps)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 0~80 % RH
Mjukvara OS-kompatibilitet OS Independent; No additional drivers or software required
Prestanda Maximal dataöverföringshastighet 5 Gbps
Typ och hastighet USB 3.0 - 5 Gbit/s
Medeltid mellan fel (MTBF) 40.103 timmar
Särskilda anmärkningar/krav System- och kabelkrav Tillgänglig USB-port
Ström Power Source Strömförsörjd via USB
Utseende Formfaktor Kompakt
Produktvikt 37 g [1.3 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 14.5 cm [5.7 in]
Produktlängd 80 mm [3.1 in]
Produktbredd 36 mm [1.4 in]
Produkthöjd 14 mm [0.6 in]
Vad det är i lådan 1 - Ingår i paketet USB 3.0-hub
snabbstartsguide

Tillbehör

USB3SAUB3

3 ft SuperSpeed USB 3.0 Cable A to Micro B

Connect a USB 3.0 Micro USB External Hard drive to your PC or laptop

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
USB3SAB6

6 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
USB3SAA6

6 ft SuperSpeed USB 3.0 Cable A to A - M/M

Connect USB 3.0 A devices to a USB hub or to your computer

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
USB3SAA6BK

6 ft Black SuperSpeed USB 3.0 Cable A to A - M/M

Connect USB 3.0 A devices to a USB hub or to your computer

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
USB3SAUB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to Micro B - M/M

Connect a USB 3.0 Micro USB External Hard drive to your computer

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB A-to-B cable

  • Computer USB port

  • USB peripheral(s)

To test your setup components, try the following:

  • Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hub, make sure that you do the following:

  • If a power adapter is included, provide power to the USB hub.

  • Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.

  • Install the drivers for the USB peripheral.

  • Install the latest drivers for the USB controller and motherboard chipset.

Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.

When testing your USB peripherals, make sure that you do the following:

  • If required, attach external power.

  • Confirm that the peripheral works on a standard USB port.

If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:

  • Use a new USB A-to-B cable.

  • Test your setup using basic USB peripherals, such as a keyboard or mouse.

  • Test using another USB port.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Before You Buy

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen