Produkt ID: ET90110ST2
The ET90110ST2 10/100 Mbps Multimode Fiber Media Converter (ST, 2 km) lets you extend a Fast Ethernet network (10/100 Mbps) over multimode fiber, at distances of up to 2 km (1.2 miles).
A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to ST Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Förpackning||Package Height||90 mm [3.5 in]|
|Package Length||13.7 cm [5.4 in]|
|Fraktvikt (förpackning)||757 g [26.7 oz]|
|Package Width||20.7 cm [8.1 in]|
|Kontakt(er)||1 - Lokala enhetskontakter||RJ-45|
|1 - Fjärrenhetskontakter||Fiber Optic ST Duplex|
|Miljö||Drifttemperatur||0°C to 60°C (32°F to 140°F)|
|Förvaringstemperatur||-10°C to 70°C (14°F to 158°F)|
|Prestanda||Maximal dataöverföringshastighet||200 Mbps (Full Duplex Mode)|
|Maximalt överföringsavstånd||2 km (1.2 mi)|
|Ström||Power Source||AC Adapter Included|
|Inspänning||100 - 240 AC|
|Polaritet på mittpol||Positive|
|Utseende||Produktvikt||387 g [13.7 oz]|
|Produktlängd||15.4 cm [6.1 in]|
|Produktbredd||87 mm [3.4 in]|
|Produkthöjd||2.4 cm [0.9 in]|
|Vad det är i lådan||1 - Ingår i paketet||Fiber Media Converter|
|Universal Power Adapter (NA/EU/UK/AU)|
Note: Terms like 1000BASE-LX, 100BASE, 1000BASE, and 10GBASE refer to how fast the data can transfer, with 100BASE being 100Mb/s, 1000BASE being 1000Mb/s or 1GB/s, and 10GBASE being 10Gb/s. FX, SX, LX, and SR refer to different fiber standards and use different wavelengths (among other things).
Fiber media converters come in different types for different applications. You need to consider the specifications for both network devices before you can select the correct fiber media converters.
A fiber media converter can be used to simply convert fiber to copper (for example, 100BASE-FX to 100BASE-TX), convert copper to fiber, or it can be used to extend a copper network over fiber optic cabling. If you use an application that uses fiber media converters, the copper and fiber industry standards must match.
The following is an example of a working fiber to copper setup:
If the copper device in the above setup is 10/100 (100BASE-T), no copper link would be detected.
Note: Some media converters do not auto-negotiate copper or fiber standards, which limits the device to 10/100 or gigabit operation. For more information, check the specifications of the media converter.
When you use the fiber media converter in a network extender setup, it works best if you use the same media converter on either end. As long as the fiber standards match, you can use different connectors and the fiber network will be created between the units.
The following are some examples of available fiber connector types:
The Open SFP units (referred to as Open on the Fiber Media Converter Drilldown) can use any mini-GBIC or SFP compatible fiber transceiver. The ET LC fiber media converters include LC SFPs, which makes the unit an open SFP, if required.
UPC and APC are fiber cable connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to be dome-shaped. This results in light that can be reflected straight back to the source.
APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. This results in a reduced amount of light that is reflected between the two connected fibers.
StarTech.com fiber cables use UPC connectors.