Produktsökning

Gigabit Ethernet Fiber Media Converter with Open SFP Slot

Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice

Produkt ID: ET91000SFP2

  • Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
  • Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances
  • Advanced features include Link-loss forwarding, remote monitor status, two frame lengths
Ditt pris
€216,99 EUR excl. VAT
€271,24 EUR incl. VAT

The ET91000SFP2 Open SFP Fiber Media Converter converts and extends a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice.

A versatile solution for connecting an Ethernet (1000Base-T) network to remote network segments over a fiber backbone, the media converter features an open SFP slot that lets you choose the MSA-Compliant Gigabit SFP that best suits your fiber connection mode (single / multi-mode) and distance requirements (see our full line of Fiber Transceivers for compatible solutions).

The fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation, while support for full-duplex operation and Jumbo Frame support provides efficient network operation.

For added versatility, this Gigabit media converter supports standalone operation, or installation into the 20 Slot, ETCHS2U (ETCHS2U). For applications where multiple chassis-mounted media converters are required, this Gigabit media converter can be purchased as a ET91000SFP2C only (ET91000SFP2C).

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Användning

  • Cost-effective way to extend/bridge networks using fiber cabling
  • Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
  • Perfect for secure connections required by government agencies where EMI is not acceptable
  • Connect traffic control/monitoring systems at extreme distances to the main office
  • Extend network connectivity to remote areas of stadiums, auditoriums or other venues

Fördelarna med StarTech.com

  • Install the SFP of your choice with the open SFP slot
  • Operate as a standalone media converter or install into the ETCHS2U chassis
  • Ensure maximum up-time with link-loss forwarding and remote status monitoring

Partnernummer

  • Ingram Micro Sweden V932943
  • UPC 065030852517

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 92 mm [3,6 in]
Package Length 20,8 cm [8,2 in]
Package Width 13,7 cm [5,4 in]
Fraktvikt (förpackning) 786 g [27,7 oz]
Hårdvara PoE Nej
WDM Nej
Industristandarder IEEE 802.3z 1000BASE-LX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX
Chipset-ID Marvell - 88E1111
Kontakt(er) 1 - Lokala enhetskontakter SFP-plats
RJ-45
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 10~90% RH (Non-Condensing)
Prestanda Maximal dataöverföringshastighet 1.25 Gbps
Fiber-driftsläge Halv/full-duplex
Auto MDIX Ja
Medeltid mellan fel (MTBF) 65, 000 Hours
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.36 A
Utspänning 12V DC
Utström 1 A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 8
Särskilda anmärkningar/krav Obs. Fiber data transfer speeds and distances are dependent on the SFP used (sold separately)
Utseende Färg Svart
Kabinettyp Stål
Produktlängd 15,4 cm [6,1 in]
Produktbredd 88 mm [3,5 in]
Produkthöjd 23 mm [0,9 in]
Produktvikt 396 g [14,0 oz]
Vad det är i lådan 1 - Ingår i paketet Fiber Media Converter
Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
Grounding Screw
Instruction Manual

Tillbehör

SFPGLCLHSMST

Cisco GLC-LH-SM-kompatibel SFP-sändtagarmodul - 1000BASE-LX/LH

1 000 Mbit/s (1 Gbit/s) | Fiber i enkel- och multiläge | LC | 10 km | Livstidsgaranti

Ditt pris
€73,99 EUR excl. VAT
€92,49 EUR incl. VAT
SFPGLCSXMMST

Cisco GLC-SX-MM-kompatibel SFP-sändtagarmodul - 1000BASE-SX

1 000 Mbit/s (1 Gbit/s) | Fiber i multiläge | LC | 550 m | Livstidsgaranti

Ditt pris
€66,99 EUR excl. VAT
€83,74 EUR incl. VAT
SFPGESST

Cisco SFP-GE-S-kompatibel SFP-fibermodul - 1000BASE-SX

1 000 Mbit/s (1 Gbit/s) | Fiber i multiläge | LC | 550 m | Livstidsgaranti

Ditt pris
€62,99 EUR excl. VAT
€78,74 EUR incl. VAT
SFPG1320C

Cisco GLC-LH-SMD-kompatibel SFP-sändtagarmodul - 1000BASE-LH

1 000 Mbit/s (1 Gbit/s) | Fiber i enkelläge | LC | 20 km | Livstidsgaranti

Ditt pris
€76,99 EUR excl. VAT
€96,24 EUR incl. VAT
Utgått
SFPG1580C

Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM – 80 km (Mini-GBIC)

Add, replace or upgrade SFP modules on Gigabit fiber equipment

Ditt pris
€181,99 EUR excl. VAT
€227,49 EUR incl. VAT
Utgått
SFPG1340C

Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM – 40 km (Mini-GBIC)

Add, replace or upgrade SFP modules on Gigabit fiber equipment

Ditt pris
€154,99 EUR excl. VAT
€193,74 EUR incl. VAT
SVA12M2NEUA

DC-strömadapter - 12 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
SVA12M5NA

DC-strömadapter - 12 V, 5 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a fiber media converter, there are some quick tests that you can complete to rule out potential problems. To identify what the source of the issue is, observe the power LED, LAN LEDs, and fiber link LED on the units.

If the power LED is not illuminated for the transmitter or the receiver, complete the following:

  • Make sure that you are using the provided power adapter(s).

  • Make sure that the adapter is plugged into a compatible wall outlet.

  • Make sure that the adapter is plugged into both the transmitter and receiver.

If another LED is not operating as expected, make sure that the components in your setup are working correctly. To test your setup components, try the following:

  • Use the cables, fiber media converter, and network devices (including SFPs, if applicable) in another setup to see if the problem is with the components or the setup.

  • Use different cables, fiber media converter, and network devices (including SFPs, if applicable) in your setup to see if the problem persists. Ideally, you should test components that you know work in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

Make sure that the DIP switches are set to the following:

  • DIP switches should be identical on both local and remote units. By default, DIP switches are set to Off (the switch is pointing up).

  • For more information about the advanced configuration options, refer to the manual for your product.

If you cannot establish a network connection between your local and remote units, you need to do the following to make sure that the issue is not related to the network configuration:

  • Use two computer systems directly connected to the fiber media converter LAN ports.

  • Open a command prompt on Computer 1 and ping Computer 2.

If the issue is not related to the network configuration, you should receive a response from Computer 2.

 

For more information on how to ping another network device, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=networking#ping-test-windows-mac-os.

Before You Buy

Different optical cables are needed for different applications. Before you select a cable to interconnect fiber devices, make sure that the following things match:

  • Mode: Single Mode or Multi Mode.

  • Wavelength: For example, 850 nm, 1310 nm, or 1550 nm.

Note: The above properties cannot be converted or changed by a cable.

When you select a cable, make sure that the cable ends (for example, LC, SC, ST, or MT) match the fiber media devices.

Simplex and duplex ends are available for most connector types. Simplex cables have the connectors separate, where duplex cables have the transmit (TX) and receive (RX) connectors joined together.  StarTech.com fiber media devices are compatible with simplex and duplex connectors.

It does not matter which diameter or OM classification the cable uses, as long as it meets the mode requirement.

Fiber media converters can be used to convert a standard Ethernet connection to a standard fiber connection, or can be used to extend a copper Ethernet network. When you use fiber media converters to extend a copper Ethernet network, make sure that the same fiber standards are being used on either end of the fiber network.

Note: Terms like 1000BASE-LX, 100BASE, 1000BASE, and 10GBASE refer to how fast the data can transfer, with 100BASE being 100Mb/s, 1000BASE being 1000Mb/s or 1GB/s, and 10GBASE being 10Gb/s. FX, SX, LX, and SR refer to different fiber standards and use different wavelengths (among other things).

Fiber media converters come in different types for different applications. You need to consider the specifications for both network devices before you can select the correct fiber media converters.

A fiber media converter can be used to simply convert fiber to copper (for example, 100BASE-FX to 100BASE-TX), convert copper to fiber, or it can be used to extend a copper network over fiber optic cabling. If you use an application that uses fiber media converters, the copper and fiber industry standards must match.

The following is an example of a working fiber to copper setup:

  • A network switch that has an LC fiber output using 1000BASE-LX is connected to an LC fiber cable that patches into the ET1000S40LC2, which is compatible with 1000BASE-LX/SX. The connected copper device is 1000BASE-T.

If the copper device in the above setup is 10/100 (100BASE-T), no copper link would be detected.

Note: Some media converters do not auto-negotiate copper or fiber standards, which limits the device to 10/100 or gigabit operation. For more information, check the specifications of the media converter.

When you use the fiber media converter in a network extender setup, it works best if you use the same media converter on either end. As long as the fiber standards match, you can use different connectors and the fiber network will be created between the units.

The following are some examples of available fiber connector types:

  • LC
  • SC
  • ST
  • Open SFP

The Open SFP units (referred to as Open on the Fiber Media Converter Drilldown) can use any mini-GBIC or SFP compatible fiber transceiver. The ET LC fiber media converters include LC SFPs, which makes the unit an open SFP, if required.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen