Gigabit Ethernet Fiber Media Converter Card Module with Open SFP Slot

Convert and extend a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice

Produkt ID: ET91000SFP2C

  • Media Converter card module designed for installation into the ETCHS2U Rackmount Chassis
  • Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances
  • Advanced features include Link-loss forwarding, remote monitor status, two frame lengths
Ditt pris
€163,99 EUR excl. VAT
€204,99 EUR incl. VAT

The ET91000SFP2C Open SFP Fiber Media Converter card module converts and extends a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice.

A versatile solution for connecting an Ethernet (1000Base-T) network to remote network segments over a fiber backbone, the media converter features an open SFP slot that lets you choose the MSA-Compliant Gigabit SFP that best suits your fiber connection mode (single / multi-mode) and distance requirements (see our full line of for compatible solutions).

Designed for applications where multiple chassis-powered media converters are required, this Gigabit media converter ships as a card module that can easily be installed into the 20 Slot, 2U Rackmount Chassis (ETCHS2U). For standalone operation this Gigabit media converter can also be purchased as a standard Open SFP Media Converter (ET91000SFP2).

The fiber to Ethernet converter offers simple plug-and-play installation, while support for full-duplex operation and Jumbo Frame support provides efficient network operation.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Användning

  • Mount multiple media converter cards into a rack mount chassis
  • Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
  • Cost-effective way to extend/bridge networks using fiber cabling
  • Perfect for secure connections required by government agencies where EMI is not acceptable
  • Connect traffic control/monitoring systems at extreme distances to the main office
  • Extend network connectivity to remote areas of stadiums, auditoriums or other venues

Fördelarna med StarTech.com

  • Install the SFP of your choice with the open SFP slot
  • Easily set up a full rack mount chassis of media converters with the card module design
  • Ensure maximum up-time with link-loss forwarding and remote status monitoring

Partnernummer

  • Ingram Micro Sweden V932944
  • UPC 065030852524

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 27 mm [1,1 in]
Package Length 18,5 cm [7,3 in]
Fraktvikt (förpackning) 0,2 kg [0,4 lb]
Package Width 13 cm [5,1 in]
Hårdvara PoE Nej
WDM Nej
Industristandarder IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX
IEEE 802.3z 1000BASE-LX
Chipset-ID Marvell - 88E1111
Kontakt(er) Lokala enhetskontakter 1 - SFP-plats
1 - RJ-45
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 10~90% RH (Non-Condensing)
Prestanda Maximal dataöverföringshastighet 1.25 Gbps
Fiber-driftsläge Halv/full-duplex
Auto MDIX Ja
Medeltid mellan fel (MTBF) 65, 000 Hours
Ström Power Source Medföljer ej (behövs ej vid vanlig användning)
Inspänning 12V DC
Inström 1 A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning < 8W
Särskilda anmärkningar/krav Obs. Fiber data transfer speeds and distances are dependent on the SFP used (sold separately)
Utseende Produktvikt 110 g [3,9 oz]
Produktlängd 14,2 cm [5,6 in]
Produktbredd 74 mm [2,9 in]
Produkthöjd 2,1 cm [0,8 in]
Vad det är i lådan Ingår i paketet 1 - Fiber Media Converter
1 - Instruction Manual

Tillbehör

SFPGLCLHSMST

Cisco GLC-LH-SM-kompatibel SFP-sändtagarmodul - 1000BASE-LX/LH

1 000 Mbit/s (1 Gbit/s) | Fiber i enkel- och multiläge | LC | 10 km | Livstidsgaranti

Ditt pris
€73,99 EUR excl. VAT
€92,49 EUR incl. VAT
SFPGLCSXMMST

Cisco GLC-SX-MM-kompatibel SFP-sändtagarmodul - 1000BASE-SX

1 000 Mbit/s (1 Gbit/s) | Fiber i multiläge | LC | 550 m | Livstidsgaranti

Ditt pris
€66,99 EUR excl. VAT
€83,74 EUR incl. VAT
SFPGESST

Cisco SFP-GE-S-kompatibel SFP-fibermodul - 1000BASE-SX

1 000 Mbit/s (1 Gbit/s) | Fiber i multiläge | LC | 550 m | Livstidsgaranti

Ditt pris
€62,99 EUR excl. VAT
€78,74 EUR incl. VAT
SFPG1320C

Cisco GLC-LH-SMD-kompatibel SFP-sändtagarmodul - 1000BASE-LH

1 000 Mbit/s (1 Gbit/s) | Fiber i enkelläge | LC | 20 km | Livstidsgaranti

Ditt pris
€76,99 EUR excl. VAT
€96,24 EUR incl. VAT
ETCHS2U

2U chassi för mediakonverterare med 20 kortplatser för ET-serie 2 fibermediakonverterare

Lägg till ett okontrollerat chassi för mediakonverterare med 20 kortplatser till ditt rack eller skåp

Ditt pris
€1 012,99 EUR excl. VAT
€1 266,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a fiber media converter, there are some quick tests that you can complete to rule out potential problems. To identify what the source of the issue is, observe the power LED, LAN LEDs, and fiber link LED on the units.

If the power LED is not illuminated for the transmitter or the receiver, complete the following:

  • Make sure that you are using the provided power adapter(s).

  • Make sure that the adapter is plugged into a compatible wall outlet.

  • Make sure that the adapter is plugged into both the transmitter and receiver.

If another LED is not operating as expected, make sure that the components in your setup are working correctly. To test your setup components, try the following:

  • Use the cables, fiber media converter, and network devices (including SFPs, if applicable) in another setup to see if the problem is with the components or the setup.

  • Use different cables, fiber media converter, and network devices (including SFPs, if applicable) in your setup to see if the problem persists. Ideally, you should test components that you know work in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

Make sure that the DIP switches are set to the following:

  • DIP switches should be identical on both local and remote units. By default, DIP switches are set to Off (the switch is pointing up).

  • For more information about the advanced configuration options, refer to the manual for your product.

If you cannot establish a network connection between your local and remote units, you need to do the following to make sure that the issue is not related to the network configuration:

  • Use two computer systems directly connected to the fiber media converter LAN ports.

  • Open a command prompt on Computer 1 and ping Computer 2.

If the issue is not related to the network configuration, you should receive a response from Computer 2.

 

For more information on how to ping another network device, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=networking#ping-test-windows-mac-os.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen