Produkt ID: SFP100BZXST
SFP100BZXST är en MSA-kompatibel SFP-fibersändare som utformats, programmerats och testats för att fungera med 100BASE-ZX-kompatibla MSA-switchar och -routrar. SFP-sändarmodulen ger tillförlitlig 100 Mb Ethernet-anslutning över fiberkabel med ett maximalt avstånd på upp till 80 km.
Tekniska specifikationer:SFP-fibermodulen är hot-swappable, vilket underlättar uppgraderingar och byten genom färre nätverksstörningar.
Alla StarTech.coms SFP- och SFP+-sändarmoduler täcks av en livstidsgaranti och kostnadsfri teknisk livstidssupport på flera språk. StarTech.com erbjuder ett brett utbud av SFP-moduler och direktanslutna SFP-kablar, vilket ger dig den bekvämlighet och tillförlitlighet du behöver för att garantera tillförlitlig nätverksprestanda.
Warranty Information | Warranty | Lifetime |
---|---|---|
Färg | Silver | |
Kabinettyp | Aluminium | |
System- och kabelkrav | MSA-kompatibel SFP-port | |
Förpackning | Package Length | 11,8 cm [4,6 in] |
Package Width | 95,0 mm [3,7 in] | |
Package Height | 34,0 mm [1,3 in] | |
Fraktvikt (förpackning) | 47,0 g [1,7 oz] | |
Hårdvara | Compatible Brand | MSA Compliant |
WDM | Nej | |
Industristandarder | IEEE 802.3u 100BASE-ZX | |
Kontakt(er) | 1 - Lokala enhetskontakter | Fiberoptisk LC duplex |
Miljö | Drifttemperatur | 0°C to 70°C (32°F to 158°F) |
Förvaringstemperatur | -40°C to 85°C (-40°F to 185°F) | |
Luftfuktighet | 5~95 % RH | |
Prestanda | Maximal dataöverföringshastighet | 155 Mbps |
Maximalt överföringsavstånd | 80 km (49.7 mi) | |
Fibertyp | Enkelläge | |
Våglängd | 1550nm | |
Fiber-driftsläge | Halv/full-duplex | |
DDM | Ja | |
Kompatibla nätverk | 100 Mbps | |
Strömförbrukning | < 1 W | |
Särskilda anmärkningar/krav | Obs. | För användning i 100 Mbps fibernätverksutrustning och mediakonverterare |
Utseende | Produktlängd | 60,0 mm [2,4 in] |
Produktbredd | 14,0 mm [0,6 in] | |
Produkthöjd | 16,0 mm [0,6 in] | |
Produktvikt | 18,0 g [0,6 oz] | |
Vad det är i lådan | 1 - Ingår i paketet | SFP-sändtagare |
Connect fiber network devices for high-speed transfers with LSZH rated cable
Connect fiber network devices for high-speed transfers with LSZH rated cable
Connect fiber network devices for high-speed transfers with LSZH rated cable
Connect fiber network devices for high-speed transfers with LSZH rated cable
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
The connector type, such as LC, SC, or ST.
The mode (single mode or multi mode).
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
The DDM support.
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
UPC and APC are fiber cable connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to be dome-shaped. This results in light that can be reflected straight back to the source.
APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. This results in a reduced amount of light that is reflected between the two connected fibers.
StarTech.com fiber cables use UPC connectors.