10/100/1000 Mbps Gigabit 1 Port USB over IP Device Server

Connect and share a high-speed USB 2.0 peripheral over a Gigabit network

Produkt ID: USB1000IP

  • Supports Gigabit and 10/100Mbps speeds (auto-detection)
  • Up to 30MBps transfer rate — the same as a direct connection to a PC USB port
  • Supports multiple device servers on the same network
Ditt pris
€112,99 EUR excl. VAT
€141,24 EUR incl. VAT

This Gigabit USB-over-IP device server offers a simple and convenient way to extend and share a USB device over long distances, and it works with multiple users connected to your network. Plus, the device server supports Gigabit (1000Mbps) speeds, so your connected devices function faster than traditional 10/100Mbps device servers.

The versatile device server connects directly to your PC, or it works with your existing network devices (for example, hubs, routers, switches) so it can easily integrate into your current network infrastructure. It’s ideal for connecting and sharing USB devices (for example, card readers, digital cameras, webcams, printers, and scanners) with multiple networked users. Plus, you can use multiple device servers on the same network, letting you connect and share even more USB peripherals.

The USB-over-IP device server includes Windows based software that provides a simple interface to connect, monitor, and control the connected device over your local area network (LAN). Plus, the software communicates directly with the device server, so it can be used in Virtual Machine (VM) environments if you have multiple VMs sharing the same set of hardware.

The USB1000IP is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Användning

  • Functions as a USB extender to enable USB serial adapters to be connected in remote areas of industrial or medical environments
  • Perfect for sharing a printer, fax machine or scanner to multiple users
  • Allow users to share access to digital photography equipment over the network in image editing/graphic design environments
  • Share a mass storage device (external hard drive) across multiple users on your IP network
  • Extend a high resolution webcam over a standard network for connection by multiple users

Fördelarna med StarTech.com

  • Connects your USB 2.0 devices over your network at full USB 2.0 speeds, for cost saving and convenient device sharing
  • Automatically connect to your device after a reboot, to save time and hassle
  • Support for 10/100Mbps or Gigabit Ethernet provides a flexible solution for virtually any network

Partnernummer

  • Ingram Micro Sweden V931495
  • UPC 065030842419

Kompatibilitet

  • Windows 7 logo
  • Windows 8 logo
  • Windows 10 logo
Windows® 10 (32/64), 8 / 8.1(32/64), 7(32/64), Vista(32/64), XP(32/64)

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 47 mm [1,9 in]
Package Length 16 cm [6,3 in]
Fraktvikt (förpackning) 0,4 kg [0,8 lb]
Package Width 22 cm [8,7 in]
Hårdvara Portar 1
Industristandarder IEEE 802.3-2002
Chipset-ID Elite Silicon - E3868M1
Indikatorer LED-indikatorer 1 - Ethernet Activity
1 - Ethernet Link
Kontakt(er) Kontakttyp(er) 1 - RJ-45
1 - USB Type-A (4-stifts) USB 2.0
Miljö Drifttemperatur 5°C to 50°C (41°F to 122°F)
Förvaringstemperatur -25°C to 70°C (-13°F to 158°F)
Luftfuktighet 20~80% RH Operating
15~90% RH Storage
Mjukvara OS-kompatibilitet Windows® 10 (32/64), 8 / 8.1(32/64), 7(32/64), Vista(32/64), XP(32/64)
Prestanda Maximal dataöverföringshastighet USB: 480Mbps
Ethernet: 10/100/1000Mbps
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.48A
Utspänning 5 DC
Utström 3A
Polaritet på mittpol Positiv
Kontakttyp H
Strömförbrukning 15
Särskilda anmärkningar/krav Obs. Does not support the connection of USB Hubs
Utseende Produktvikt 37 g [1,3 oz]
Färg Svart
Produktlängd 8 cm [3,1 in]
Produktbredd 40 mm [1,6 in]
Produkthöjd 2 cm [0,8 in]
Vad det är i lådan Ingår i paketet 1 - Gigabit USB IP Device Server
1 - Universal Power Adapter (US/UK/EU)
1 - Driver CD
1 - User Manual

Tillbehör

USB2HAB10

3 m Certifierad USB 2.0 A- till B-kabel - M/M

Anslut USB 2.0-tillägg till din dator

Ditt pris
€4,99 EUR excl.
€4,99 EUR incl.
USB2HAB6

1,8 m Certifierad USB 2.0 A- till B-kabel - M/M

Anslut USB 2.0-tillägg till din dator

Ditt pris
€2,99 EUR excl.
€2,99 EUR incl.
USB2HABM6

1,8 m Mini USB-kabel - A till Mini B

Anslut din bärbara enhet (USB Mini) till en dator via ett standard USB 2.0 typ A-uttag.

Ditt pris
€2,99 EUR excl.
€2,99 EUR incl.
USB2HABM10

10 ft USB 2.0 Cable - USB A to Mini B

Connect your (USB Mini) portable device to a host computer through a standard USB 2.0 type-A slot

Ditt pris
€2,99 EUR excl.
€2,99 EUR incl.

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Inbyggd programvara

Manual(er):

Mjukvara

Stödmaterial:

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

Du bör inte uppgradera enhetens inbyggda programvara om du inte har några problem med enhetens funktioner. Du behöver bara uppgradera om du har problem med enheten och är säker på att problemet är den inbyggda programvaran.  Du kan bekräfta detta genom att läsa igenom den medföljande dokumentationen eller kontakta vår tekniska avdelning. Felaktig uppgradering av inbyggd programvara kan resultera i minskade prestanda så vi rekommenderar att du kontaktar StarTech.com först.

If the device is not detected in the USB Server software, complete the following:

  • Make sure that the computer is on the same network as the device.
  • By default, the device uses DHCP. On a network that is plug-and-play, the device is assigned an IP address by the DHCP server and is detected by a computer that is on the same network as the device.
  • To troubleshoot the device, connect it directly to a computer on the 192.168.1 network. For more information about configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software.
  • If the network configuration of the device was changed, you cannot complete a hardware reset to put the unit back on 192.168.1.50. Instead, you need to obtain the static IP address from the person who modified the server.
  • Wait 5 minutes for the USB Server software to detect the device.
  • Move the device to a less congested network.

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the USB Server software:

  1. Download the latest software package from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the software and restart the computer when prompted.
  2. Your computer will automatically complete the software installation and your device should be ready to use.

Set up the software

Confirm that the extender is on the same network as your computer. If you are using a network with DHCP, you do not need to configure anything further.

If you are using an Ethernet cable to connect to the unit or you are using a network without DHCP, you need to change the IP address on your computer to the default IP network of the IP device server. Change the IP address of your system to 192.168.1.XXX, where XXX is a number between 1 and 49.

Note: The default IP address of the extender is 192.168.1.50 on the default subnet mask of 255.255.255.0.

USB Server software

Your extender is detected by the USB Server software when the software is launched.

Note: It may take a few minutes for the server to appear in the software.

When the extender appears in the list (for example, USB2HDMI), click either the display or media device associated with the server. Click on one of the devices and then click Connect Device.

When the USB Server software configuration is complete, the display and media devices are connected to your system as though the devices are installed locally. By default, Windows creates an extended desktop for the display, which you can reconfigure in the control panel.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen