Heatsink Thermal Pads - Pack of 5

Improves heat transfer between a CPU/chipset and heatsink with easy-to-use thermal pads


  • Low thermal impedance
  • Electrically non-conductive
  • Solid at room temperature, it softens at heatsink operating temperatures
  • Conforms to surface irregularities
£3.99 GBP exc VAT
£4.79 GBP inc VAT
227+ In stock
Where To Buy

Technical Specifications

Warranty Information
Warranty 2 Years
Specific Gravity 1.11
Thermal Conductivity 0.7 W/m-k
Thermal Resistance 0.03 °C-in/W @ 50 PSI
Special Notes / Requirements
Note Heatsink/Component Clamping Pressure (Recommended): 5 to 100 PSI (0.035 to 0.690 MPa)
Operating Temperature -60°C to 125°C (-76°F to 257°F)
Physical Characteristics
Color Pink
Materials Phase Change Temperature: 58°C

Volume Resistivity: 1x 1015 Ohm-cm

Product Height 0 cm [0 in]
Product Length 30 mm [1.2 in]
Product Width 30 mm [1.2 in]
Weight of Product 6 g [0.2 oz]
Packaging Information
Package Height 2 mm [0.1 in]
Package Length 12.5 cm [4.9 in]
Package Quantity 5
Package Width 90 mm [3.5 in]
Shipping (Package) Weight 8 g [0.3 oz]
What's in the Box
Included in Package 5 - Thermal Pad


Related Products

Metal Oxide Thermal CPU Paste Compound Tube for Heatsink
1.5g Metal Oxide Thermal CPU Paste Compound Tube for Heatsink

Provide optimal heat transfer between CPU and heatsink through a metal oxide compound

£2.99 exc VAT
£3.59 inc VAT
229+ In stock
Heatsink Thermal Pads - Pack of 5

Customer Reviews

1 (8 reviews)
1 out of 5 stars
Quality of Product
Tell us what you think of this product.

Need a little help getting started? Check out our review guidelines.

1 - 8 of 8 Reviews

(1 star) Didn't Work as advertised

By: generalbear
Purchased a package of the Heatsink Thermal Pads about two months ago at the local Micro Center (Stock Number 560243). About a month ago I needed to use them but, I couldn't get them to work. The Thermal Pads stuck to the backing material and NOTHING I did would cause the pads to stick to the Heat Sink! I tried several with no Joy. To say I was disappointed is an understatement. I had to make a 50 mile trip to the local Micro Center to buy a tube of heatsink thermal paste.
Comment Helpful? Yes - 0 No - 0 Report
Response from
Matt, Customer Support
We understand your disappointment with our HSFPHASECM and recognize that this is not the performance expected from our products. We'd like to make this right for you and send you a unit of our SILVGREASE1 free of charge. Please contact us at and reference this review. Our Technical Advisors are available 24 hours a day, 5 days a week to provide assistance.

(1 star) Save your money

By: Jcola
what this product today fell apart when trying to apply it did not work the thermal paste stuck to the paper could not apply to the heatsink
Comment Helpful? Yes - 0 No - 0 Report
Response from
Matt, Customer Support
We're sorry to hear about the difficulties you experienced with our HSFPHASECM. We're contacting you directly at the email address provided as we would like to send you a unit of our SILVGREASE1 (Thermal paste) at no cost to you.

(1 star) Don't buy does not work at stated

By: jrom1212
Bought this product to replace the thermo pad on my cpu fan heatsink . Its not sticky at all. Unable to apply and leave attacked to pull off secondary covering off. Waste of time and money.
Comment Helpful? Yes - 1 No - 0 Report

(1 star) No directions - didn't work

By: Tjmac
Terrible product. Waste of money and time. No directions on how to use and when researching how to peel and apply, it didn't cleanly peel leaving the backing stuck to the pad.
Comment Helpful? Yes - 1 No - 0 Report

(1 star) Performs as bubble gum.

By: jcmarin2298
I wasted my money on these pads. The instructions are very vague and confusing. I couldn't tell if I was supposed to keep the blue plastic or not. The wax paper peels onto the material leaving a residue that blocks the heat it is meant to conduct. If you try to remove the wax paper fibers, the material becomes like bubble gum and gets destroyed and uneven. I have no idea on how this product made it to market.
Comment Helpful? Yes - 1 No - 2 Report

(1 star)

By: Hz dhjcjfid
Quality of Product (1/5)
Comment Helpful? Yes - 0 No - 4 Report

(1 star)

By: eric
The pad is not adhesive. The pad itself sticks to the backing material better than ceramic or metal and it falls apart when trying to forcefully apply it.
Quality of Product (1/5)
Comment Helpful? Yes - 4 No - 1 Report

(1 star) Awful - waste of money

By: bgreenhouse
Bought these to repair a PS3, I don't know if they'd been sitting too long or what, but the adhesive won't stick to the heatsink stronger than the wax paper, so you end up hopelessly mangling the pad while trying to install it.
Quality of Product (1/5)
Comment Helpful? Yes - 4 No - 0 Report