Heatsink Thermal Pads - Pack of 5
Improves heat transfer between a Microcontroller/chipset and heatsink with easy-to-use thermal pads
Product ID: HSFPHASECM
1 stars
(11 reviews) |
- Electrically non-conductive
- Low thermal impedance
- Conforms to surface irregularities
Your price
£5.99
GBP excl. VAT
£7.19
GBP incl. VAT
In stock: 520
This 5 pack of Thermal Pads offers a suitable alternative to using heatsink paste/grease. The thermal pads remain solid at room temperature, and soften at heatsink operating temperatures - eliminating the mess of heat grease, while maximizing heat conduction to create a cooler operating environment for your hard working microcontrollers or chipset components.
Applications
The StarTech.com Advantage
- Mess free
Partner Numbers
- Exertis 0010012510
- Ingram Micro UK V931812
- CMS Distribution V215527
- UPC 065030809191
Specifications
| Warranty Information | Warranty | 2 Years |
|---|---|---|
| Environmental | Operating Temperature | -60°C to 125°C (-76°F to 257°F) |
| Packaging Information | Package Height | 2.0 mm [0.1 in] |
| Package Length | 12.5 cm [4.9 in] | |
| Shipping (Package) Weight | 8.0 g [0.3 oz] | |
| Package Width | 90.0 mm [3.5 in] | |
| Package Quantity | 5 | |
| Performance | Thermal Conductivity | 0.7 W/m-k |
| Thermal Resistance | 0.03 °C-in/W @ 50 PSI | |
| Specific Gravity | 1.11 | |
| Physical Characteristics | Weight of Product | 6.0 g [0.2 oz] |
| Color | Pink | |
| Material | Steel | |
| Materials | Phase Change Temperature: 58°C
Volume Resistivity: 1x 1015 Ohm-cm |
|
| Product Length | 30.0 mm [1.2 in] | |
| Product Width | 30.0 mm [1.2 in] | |
| Product Height | 0.1 mm [0.0 in] | |
| Special Notes / Requirements | Note | Heatsink/Component Clamping Pressure (Recommended): 5 to 100 PSI (0.035 to 0.690 MPa) |
| What's in the Box | 5 - Included in Package | Thermal Pad |
Certifications
View downloadable documentation
Drivers/Downloads
Talk to an Advisor
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)Manual(s):
-
hsfphasecm.pdf
- Language: EN
Datasheet
-
hsfphasecm_Datasheet.pdf
- Datasheet
- Language: EN
Product Support
Talk to an Advisor
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)Compliance and safety
Compliance letters
-
RoHS & REACH Certificate of Compliance
- Language: English
-
Country of Origin (COO)
- Language: English
-
Declaration of Conformity (DOC)
- Language: English
Safety Measures
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.
Customer Reviews
(11 reviews)1 out of 5 stars
Tell us what you think of this product.
Need a little help getting started?
Check out our review guidelines.
Awful - waste of money
Bought these to repair a PS3, I don't know if they'd been sitting too long or what, but the adhesive won't stick to the heatsink stronger than the wax paper, so you end up hopelessly mangling the pad while trying to install it.
The pad is not adhesive. The pad itself sticks to the backing material better than ceramic or metal and it falls apart when trying to forcefully apply it.
Performs as bubble gum.
I wasted my money on these pads. The instructions are very vague and confusing. I couldn't tell if I was supposed to keep the blue plastic or not. The wax paper peels onto the material leaving a residue that blocks the heat it is meant to conduct. If you try to remove the wax paper fibers, the material becomes like bubble gum and gets destroyed and uneven. I have no idea on how this product made it to market.
No directions - didn't work
Terrible product. Waste of money and time. No directions on how to use and when researching how to peel and apply, it didn't cleanly peel leaving the backing stuck to the pad.
Don't buy does not work at stated
Bought this product to replace the thermo pad on my cpu fan heatsink . Its not sticky at all. Unable to apply and leave attacked to pull off secondary covering off.
Waste of time and money.
Save your money
what this product today fell apart when trying to apply it did not work the thermal paste stuck to the paper could not apply to the heatsink
We're sorry to hear about the difficulties you experienced with our HSFPHASECM. We're contacting you directly at the email address provided as we would like to send you a unit of our SILVGREASE1 (Thermal paste) at no cost to you.
Exactly the same thing happened to me. Now I have to order something more expensive as I don't wanna go through this again but it won't be a star tech product.
Didn't Work as advertised
Purchased a package of the Heatsink Thermal Pads about two months ago at the local Micro Center (Stock Number 560243). About a month ago I needed to use them but, I couldn't get them to work. The Thermal Pads stuck to the backing material and NOTHING I did would cause the pads to stick to the Heat Sink! I tried several with no Joy.
To say I was disappointed is an understatement. I had to make a 50 mile trip to the local Micro Center to buy a tube of heatsink thermal paste.
We understand your disappointment with our HSFPHASECM and recognize that this is not the performance expected from our products. We'd like to make this right for you and send you a unit of our SILVGREASE1 free of charge. Please contact us at www.startech.com/support and reference this review. Our Technical Advisors are available 24 hours a day, 5 days a week to provide assistance.
Like others, pads would not stick
The pad material would not separate from the backing, just like the other reviews. The only thing I did not try was to briefly fire up the processor without a heat sink to melt the material onto the processor to get it to separate. Save your money. These pads are no good.
Hello,
We're sorry to hear they weren't working for you. One of our Technical Advisors will be reaching out to hear more about your experience and see what we can do.
Absolutely waste of money
I bought this from ebuyer I really don't know why they even have this on stock they should scrap it!!
Terrible!
They are a pain to install and even of you manage to apply it they don't work. My CPU immediately jump to a 100 °C just being in the BIOS
You might also like
Wait...