Can’t find the product you need? Our support team is standing by to help you find the right solution or recommend replacement products. Click here for live chat.

8-Port PoE+ Gigabit Ethernet Switch plus 2 SFP Connections - Managed - Wall Mount with Front Access

Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management

Product ID: IES101GP2SFW

  • Expand your network with 8x RJ45 (PoE+) ports + 2x fiber SFP slots in one Gigabit network switch
  • PoE power up to 30W per PoE port (200W budget)
  • Rugged IP30 industrial design with metal housing and extended temperature range (-40° to +75° C)
View More
  • Front access provides easy access to ports and indicators
  • Compact wall-mount or DIN-rail mount design (with magnetic mounts)
  • Layer 2 management for improved network control, efficiency, and stability
  • Compatible with 10/100/1000Mbps networks
  • Dual power input (terminal block/DC plug)
  • IPv4 and IPv6 dual stack management
  • IGMP and MLD support
  • Support for link aggregation, VLAN tagging, spanning tree protocol, port-based network access control
£526.99 GBP exc VAT
£632.39 GBP inc VAT
17+ In stock
Where To Buy

Technical Specifications

Warranty Information
Warranty 2 Years
Industry Standards IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.3x Flow Control, IEEE 802.1q VLAN Tagging, IEEE 802.1p QoS, IEEE 802.1x Port-Based Network Access Control, IEEE802.3ad Link Aggregation, IEEE 802.1d Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol
Interface RJ45 (Gigabit Ethernet)
Fiber Ethernet
Ports 10
Auto MDIX Yes
Buffer Size 512 KB
Compatible Networks 10/100/1000 Mbps
Flow Control IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Full Duplex Support Yes
Jumbo Frame Support 9K max.
Maximum Cable Length 100 m [328 ft]
Maximum Data Transfer Rate 2 Gbps (Full-Duplex)
MTBF > 100,000 hrs @ 25 degrees C
Supported Protocols IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Surge Protection 6kV ESD, 6kV EFT
Switching Architecture Store-and-Forward
Connector Type(s) 8 - RJ-45 (PoE+) Female
2 - SFP Slot Female
1 - Terminal Block (3 Wire) Male
Special Notes / Requirements
Note 8 ports support IEEE 802.3at Power over Ethernet Plus (PoE+) and IEEE 802.3af Power over Ethernet (PoE)
Supports PoE Powered Device alive check, scheduled power recycling, and time-based PoE schedule
PoE power up to 30W per PoE+ port (200W budget) and remote PoE power control
A power adapter is not included with this switch.
Patents and Licenses The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
LED Indicators 1 - Power
8 - PoE Active (yellow)
Link/Activity (green)
2 - 100Mbps Link/Activity (yellow)
1000Mbps Link/Activity (green)
Input Current 1A minimum
Input Voltage 48 ~ 56V DC
Plug Type M
Power Source Terminal Block
Humidity 5~95% RH (Non-Condensing)
Operating Temperature -40°C to 75°C (-40°F to 167°F)
Storage Temperature -40°C to 90°C (-40°F to 194°F)
Physical Characteristics
Color Black
Material Steel
Product Height 2.5 cm [1 in]
Product Length 13.4 cm [5.3 in]
Product Width 17.8 cm [7 in]
Weight of Product 618 g [21.8 oz]
Packaging Information
Package Height 90 mm [3.5 in]
Package Length 30 cm [11.8 in]
Package Width 17 cm [6.7 in]
Shipping (Package) Weight 0.9 kg [2.1 lb]
What's in the Box
Included in Package 1 - network switch
1 - terminal block connector
4 - screw anchors
4 - screws
4 - attaching pins
4 - locking pins
4 - washers
4 - magnets
1 - DIN rail
3 - DIN-rail screws
8 - RJ45 dust caps
2 - SFP dust caps
1 - quick-start guide


Related Products

8-Port Gigabit Ethernet Switch with 2 Open SFP Slots
8-Port Gigabit Ethernet Switch with 2 Open SFP Slots

Wall Mount Ethernet Switch | 10/100/1000Mbps | 8 RJ45 Ports | L2 Managed

£405.99 exc VAT
£487.19 inc VAT
13+ In stock
8-Port (4 PoE+) Gigabit Ethernet Switch - Managed - Wall Mount with Front Access
8-Port (4 PoE+) Gigabit Ethernet Switch - Managed - Wall Mount with Front Access

Connect up to 8 different GbE (4 PoE+) devices, using this IP30 industrial Ethernet switch with intelligent Layer 2 management

£445.99 exc VAT
£535.19 inc VAT
30+ In stock


8-Port PoE+ Gigabit Ethernet Switch plus 2 SFP Connections - Managed - Wall Mount with Front Access

Customer Reviews

2.3 (3 reviews)
2.3 out of 5 stars
Quality of Product
Tell us what you think of this product.

Need a little help getting started? Check out our review guidelines.

1 - 3 of 3 Reviews

(1 star) Lead AV

By: Trenton777
no power supply included. startech does not make a power supply that works with this unit. their advice "look at the specs and go find one from a third party" Don't buy this unless you want a headache too.
Comment Helpful? Yes - 1 No - 1 Report
Response from
Matt, Customer Support
We always try to ensure our customers have exceptional experiences with us and our products and we apologize for any confusion when purchasing our IES101GP2SFW. This switch does not come with a power adapter as it is designed to be used with Terminal Block power, but also because there are a wide range of power requirements for different users and it would raise the cost far more if we were to include a power adapter that provided the full 200W that the switch is able to provide than if you are to purchase a power adapter separately that only provides the amount of power that you need to use as many customers may only be providing power to 2-4 of the ports. The switch supports a 48-56V power adapter and as long as you know the wattage required by all of your devices, you should be able to find a third-party power supply that fits within that voltage range. However, if you require assistance verifying the specifics of the power supply you need we'd be happy to help calculate this for you. Our Technical Advisors are available 24 hours a day, 5 days a week at

(5 stars) been reliable as a rock

By: homelabs
bought this a year ago now for use at home. been running almost 24/7 and not had a single issue with it. The only additional thing I would recommend is that the Web Interface is brought up to date a little more as it currently looks a little dated.
Comment Helpful? Yes - 1 No - 1 Report

(1 star) Product ships with no power supply

By: CDR2222
We bought this switch for one of our Customers. When we went to install, we noticed that there was no power supply included. We called Startech who informed us that we would have to get a power supply from a 3rd party and did not have any specific recommendations. This ended up delaying our project and we ended up getting a different network switch that included a power supply. For 20+ years purchasing network switches, I have never come across a product that did not ship with a power supply. To this date we still have no power supply for this switch and it is basically just sitting on the shelf.
Comment Helpful? Yes - 4 No - 9 Report
Response from
Brian, Customer Support
Thanks for sharing your feedback with us. We sincerely apologize for the confusion surrounding how to power this network switch. This model is designed for industrial settings with terminal block power available. As a result, we do not include a power adapter with the product. It can also be powered by a 48V DC power adapter that supplies 1 to 5A of current. This type of power adapter can be purchased online or from many electronics stores. We hope this helps.