Product ID: 2SD4FCRU3
This USB 3.0 SD™ card reader lets you access two SD cards simultaneously.
You can:
The card reader transfers files between your USB-A tablet, laptop or desktop computer and the SD card.
The USB SD card reader features SD 4.0 and UHS-II support. It reads and writes to and from the cards at speeds of up to 312MB/s. The reader also supports USB 3.0 connection speeds of up to 5Gbps between the computer and the reader. The reader is backward compatible with USB 2.0 and 1.1.
The dual SD card reader supports all SD cards: SD (Secure Digital), SDHC™ (Secure Digital High Capacity) and SDXC™ (Secure Digital Extended Capacity). It also supports UHS cards, and is backward compatible with older SD cards.
The card reader will also support the following card types when connected through an adapter:
The reader has a small footprint design and comes with a wrap-around USB-A cable. It fits nicely inside a carrying case. The reader is USB powered, but you can connect a power source to the Micro-USB power port if you require more power.
2SD4FCRU3 is TAA compliant and comes with a StarTech.com 2-year warranty and free lifetime technical support.
Warranty Information | Warranty | 2 Years |
---|---|---|
2 - External Ports | SD / MMC Slot | |
Connector(s) | 2 - Drive Connectors | SD / MMC Slot |
1 - Host Connectors | USB Type-A (9 pin) USB 3.0 (5 Gbps) | |
1 - Other Interface(s) | USB Micro-B (5 pin) | |
Environmental | Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Storage Temperature | -20°C to 70°C (-4°F to 158°F) | |
Humidity | 5% ~ 90% | |
Hardware | Interface | USB 3.0 |
Bus Type | USB 3.0 | |
Chipset ID | Genesys Logic - GL3215 Genesys Logic - GL3522 |
|
Packaging Information | Package Height | 1.3 in [32.0 mm] |
Package Length | 6.9 in [17.4 cm] | |
Shipping (Package) Weight | 5.0 oz [142.0 g] | |
Package Width | 5.7 in [14.4 cm] | |
Performance | Maximum Data Transfer Rate | 5 Gbps |
Type and Rate | USB 3.0 - 5 Gbit/s | |
Memory Media Type | SD/MMC (Secure Digital/Multimedia Card) | |
SDHC (Secure Digital High Capacity) | ||
SDXC (Secure Digital eXtended Capacity) | ||
General Specifications | Supports SD 4.0 and UHS-II (Ultra High Speed) for high speed file transfers, with bus speed up to 312MB/s | |
Physical Characteristics | Color | Black |
Material | Plastic | |
Cable Length | 5.0 in [12.7 cm] | |
Product Length | 4.2 in [10.6 cm] | |
Product Width | 2.7 in [69.5 mm] | |
Product Height | 0.5 in [13.5 mm] | |
Weight of Product | 2.0 oz [57.0 g] | |
Power | Power Source | Not Included (not required for standard applications) |
Output Voltage | 5 DC | |
Output Current | 2000 mA | |
Plug Type | USB Micro-B | |
Software | OS Compatibility | OS independent; No software or drivers required |
Special Notes / Requirements | System and Cable Requirements | Available USB port |
Note | USB powered. For additional power, connect the USB cable on your power source to the AUX Micro-B power port. | |
What's in the Box | 1 - Included in Package | dual-slot SD card reader |
quick-start guide |
Extend your SuperSpeed USB 3.0 cable by up to an additional meter
Extend a USB 3.0 port from the back of your computer to your desktop
Add 7 external, USB 3.0 ports to a computer from a single USB connection
Add four external SuperSpeed USB 3.0 ports from a single USB connection
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
To confirm that Windows detects your USB device, complete the following:
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Check out our review guidelines.