Product ID: MASFP1GBTXST
The MASFP1GBSXST is a Cisco Meraki MA-SFP-1GB-SX compatible copper transceiver module that has been designed, programmed and tested to work with Cisco Meraki™ brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over copper cable, for 10BASE-T, 1000BASE-T and 100BASE-TX compliant networks, with a maximum distance of up to 100 m (328 ft).
This SFP copper module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
All StarTech.com SFP & SFP+ transceiver modules are backed by a lifetime warranty and free lifetime multilingual technical support. StarTech.com offers a wide variety of SFP modules and direct-attach SFP cables, providing the convenience and reliability you need to ensure dependable network performance.
|System and Cable Requirements||MSA or Cisco Meraki compliant SFP port|
|For use in 1 Gigabit networking equipment and media converters|
|Connector(s)||1 - Local Unit Connectors||RJ-45|
|Environmental||Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Hardware||Industry Standards||IEEE 802.3i 10BASE-T|
|Compatible Brand||Cisco Meraki|
|Industry Standards||IEEE 802.3ab 1000BASE-T|
|IEEE 802.3u 100BASE-TX|
|Packaging Information||Package Height||1.4 in [35.0 mm]|
|Package Length||3.7 in [93.0 mm]|
|Shipping (Package) Weight||1.8 oz [51.0 g]|
|Package Width||4.6 in [11.8 cm]|
|Performance||Maximum Data Transfer Rate||1000 Mbps|
|Max Transfer Distance||100 m (328 ft)|
|Fiber Operating Mode||Full-Duplex|
|Compatible Networks||10/100/1000 Mbps|
|Power Consumption (In Watts)||< 1.3 W|
|Physical Characteristics||Weight of Product||0.7 oz [21.0 g]|
|Product Length||2.7 in [68.0 mm]|
|Product Width||0.7 in [18.0 mm]|
|Product Height||0.5 in [13.8 mm]|
|What's in the Box||1 - Included in Package||SFP transceiver|
Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice
Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management
Wall Mount Ethernet Switch | 10/100/1000Mbps | 8 RJ45 Ports | L2 Managed
Convert and extend different networks over a Gigabit fiber cable connection using the SFP of your choice
Ensure the Network Device is running a compatible Firmware Version on a compatible Operating System. Please consult the manufacturer of the Network Device for more information regarding the minimum required or recommended system software.
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
The connector type, such as LC, SC, or ST.
The mode (single mode or multi mode).
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
The DDM support.
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.