Product ID: SP122DP2DVI
The SP122DP2DVI DisplayPort® to Dual DVI Spanner/Cloner is an innovative, external multi-display/Multi-monitor adapter that allows you to add 2 DVI displays to your desktop or laptop from a single DisplayPort source.
This DisplayPort to 2x DVI graphics expansion module lets you combine 2 DVI monitors as one display, for a combined maximum resolution of 3840x1200, to create the ultimate widescreen desktop. The DP to dual DVI can also clone your primary display and function as a DisplayPort to dual DVI Video Splitter.
Compatible with a DisplayPort video card and DVI displays, the graphics expansion module requires no software installation for multi-display applications, simplifying configuration and saving time.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Computer Settings||Each Monitor|
Based on a Vertical Refresh
Rate of 60Hz.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector A||DisplayPort (20 pin)|
|2 - Connector B||DVI-I (29 pin)|
|Operating Temperature||0°C to 60°C (32°F to 140°F)|
|Storage Temperature||-10°C to 70°C (14°F to 158°F)|
|Packaging Information||Shipping (Package) Weight||202 g [7.1 oz]|
|Package Length||14.4 cm [5.7 in]|
|Package Width||21 cm [8.3 in]|
|Package Height||38 mm [1.5 in]|
|Maximum Digital Resolutions||One Display: 1920x1200
Two Displays: 3840x1200
|Wide Screen Supported||Yes|
|Product Length||10.5 cm [4.1 in]|
|Product Width||65 mm [2.6 in]|
|Product Height||23 mm [0.9 in]|
|Weight of Product||105 g [3.7 oz]|
|What's in the Box||1 - Included in Package||DisplayPort® to Dual DVI Multi Monitor Adapter|
Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.
If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:
Unplug all of the video connections.
If the splitter is powered, power cycle the splitter.
Plug in all of the video connections again.
Make sure that the first video connection plugged in is the one that you want to be the master port.