Product ID: SATAPOWADPL
In stock: 2792
The SATAPOWADPL LP4 to 90-degree SATA power adapter features one 4-Pin LP4 male connector and a left angle, 90-degree SATA power connector (female), which enables you to power a Serial ATA hard drive from a conventional LP4 connection and eliminates the need to upgrade the computer power supply for compatibility with the SATA hard drive.
The 90-degree (left angle) SATA power connector makes it easier to connect a SATA drive that's installed in hard to reach areas or tight spaces, avoiding the strain on both the connector and cable.
This LP4 to SATA adapter is backed by StarTech.com's Lifetime Warranty.
|Connector(s)||1 - Connector A||LP4 (4 pin; Large Drive Power)|
|1 - Connector B||SATA Power (15 pin)|
|Packaging Information||Package Height||22.0 cm [8.7 in]|
|Package Length||0.7 mm [0.0 in]|
|Shipping (Package) Weight||23.0 g [0.8 oz]|
|Package Width||12.8 cm [5.0 in]|
|Physical Characteristics||Product Height||21.6 mm [0.9 in]|
|Weight of Product||15.0 g [0.5 oz]|
|Product Width||24.6 mm [1.0 in]|
|Connector Style||Left Angled|
|Cable Length||15.2 cm [6.0 in]|
|Product Length||15.2 cm [6.0 in]|
|What's in the Box||1 - Included in Package||6in 4 Pin LP4 to Left Angle SATA Power Cable Adapter|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Check out our review guidelines.