Product ID: ICUSB232PROC
In stock: 269
This USB-C™ to serial adapter lets you connect your USB-C devices to your legacy serial equipment. It converts a USB-C port on your laptop or computer into an RS232 DB9 serial port with COM port retention. This gives you a cost-saving and convenient way to connect to serial devices such as point-of-sale terminals, serial modems, industrial equipment, and a wide variety of other RS232 peripherals.
Connect with ease
The RS232 adapter cable is compatible with Windows®, macOS and Linux® operating systems, which makes it easy to integrate into mixed environments.
A time-saving and convenient USB/serial solution, the adapter retains assigned serial COM port values in nonvolatile memory, allowing the same values to automatically be re-assigned to the adapter serial port if disconnected and reconnected, or disconnected from one USB port and installed in another.
The USB-C serial cable also supports advanced features like remote wake-up and power management control.
The ICUSB232PROC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector Type(s)||USB Type-C (24-pin) USB 2.0 (480Mbps)|
|DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||-10°C to 80°C (14°F to 176°F)|
|Storage Temperature||-20°C to 100°C (-4°F to 212°F)|
|Port Style||Cable Adapters|
|Industry Standards||USB 1.1/2.0 RS232|
|Chipset ID||Prolific - PL2303GT|
|Packaging Information||Shipping (Package) Weight||54 g [1.9 oz]|
|Package Length||20 cm [7.9 in]|
|Package Width||22 cm [8.7 in]|
|Package Height||0.1 mm [0.0 in]|
|Max Baud Rate||921.6 Kbps|
|Data Bits||5, 6, 7, 8|
|Flow Control||None, Xon/Xoff, RTS/CTS, DTR/DSR|
|Parity||Odd, Even, Mark, Space, or None Parity Modes|
|Stop Bits||1, 1.5, 2|
|Cable Length||0.4 m [1.4 ft]|
|Product Length||42.8 cm [16.9 in]|
|Product Width||35 mm [1.4 in]|
|Product Height||2 cm [0.8 in]|
|Weight of Product||36 g [1.3 oz]|
|Software||OS Compatibility||Windows® 7, 8.1, 10, 11
Windows Server® 2008 R2, 2012 R2, 2016, 2019
macOS 10.11 and 10.15, 11.0, 12.0
Linux 2.6.x to 4.4.x LTS Versions only
|Special Notes / Requirements||System and Cable Requirements||One available USB-C port|
|What's in the Box||1 - Included in Package||serial adapter cable|
Convert a DB9 male port to a DB25 female port
In stock: 128
Convert a DB9 male port to a DB25 male port
In stock: 2726
Starting in High Sierra 10.13, macOS enforces stricter security policies than previous revisions. As a result of these changes, software packages, like those used in this installation, will need to be allowed within the macOS Security and Privacy settings, immediately after the software has been installed, in order for the device to operate.
To allow the software, follow these steps after you've completed installation on your Mac:
Note: The option to allow the software will be available within the Security & Privacy settings for 30 minutes. If the software is not allowed within that time frame, the software must be reinstalled in order for macOS to grant the opportunity to allow it again.
Older applications that use serial communication often use legacy hardware addresses that do not work with PCI, PCIe, or USB to Serial products. We recommend contacting the software provider/support team to check if this is the case.
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.
Check out our review guidelines.