Product ID: PCI4S550
The PCI4S550 4-Port PCI RS232 Serial Adapter Card (16550 UART) adds four RS232 serial ports, using a single PCI slot - a cost-effective solution for connecting any new or legacy serial device, with data transfer rates of up to 115.2 Kbps. The included breakout cable separates the ports to avoid cluttered connections.
Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more to your system, the adapter card supports IRQ sharing and operates flawlessly in Windows® and Linux® environments.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
|Connector(s)||1 - Connector Type(s)||PCI / PCI-X (Universal 3.3 & 5V, 32-bit)|
|4 - External Ports||DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||-10°C to 80°C (14°F to 176°F)|
|Storage Temperature||-20°C to 100°C (-4°F to 212°F)|
|Bus Type||PCI / PCI-X (5 / 3.3V)|
|Card Type||Standard Profile|
|Port Style||Dongle (Included)|
|Industry Standards||PCI 2.1|
|Chipset ID||PLX/Oxford - OX16PCI954|
|Packaging Information||Package Length||21.5 cm [8.5 in]|
|Package Width||53 mm [2.1 in]|
|Package Height||15.2 cm [6.0 in]|
|Shipping (Package) Weight||0.4 kg [0.9 lb]|
|Performance||Maximum Data Transfer Rate||115.2 Kbps|
|Physical Characteristics||Product Length||12 cm [4.7 in]|
|Product Width||95 mm [3.7 in]|
|Product Height||1.8 cm [0.7 in]|
|Weight of Product||78 g [2.8 oz]|
|Software||OS Compatibility||Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000, 98SE, 95
Windows Server® 2012, 2008 R2, 2003 (32/64)
|What's in the Box||1 - Included in Package||4 port PCI serial card|
|Driver Disk (pdf manual included)|
Convert a DB9 male port to a DB25 male port
In stock: 2204
Convert a DB9 male port to a DB25 female port
In stock: 87
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.