Product ID: PEX2S553S
The PEX2S553S 2-Port PCI Express Serial Card lets you add two ESD-Protected RS232 ports with 5V or 12V selectable power output, through a PCI Express slot.
Ideal for industrial environments, this 2-port serial card offers built-in 15KV ESD-protection which helps prevent damage to connected devices in the event of line surges and electro-static discharge. An extended operating temperature range (-30°C to 75°C) also helps to ensure performance in harsh environments.
For devices that require additional power, this serial controller has a jumper-selectable 5V or 12V power output option (pin 1 and/or pin 9), through an LP4 connection to your power supply. For added flexibility, the power output can be enabled or disabled on a per-port basis so you choose which port(s) supply power.
This versatile RS232 card supports high-speed serial data rates up to 921.6 Kbps, and is compliant with PCIe Gen 2.0 specifications for added bandwidth. To maximize installation options, the 2-port card is equipped with a standard profile bracket and includes an optional low-profile/half-height bracket for installation in small form factor computers.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
|Connector(s)||1 - Connector Type(s)||PCI Express x1|
|2 - External Ports||DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||-30°C to 75°C (-22°F to 167°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Humidity||5~95% RH (Non-Condensing)|
|Bus Type||PCI Express|
|Card Type||Standard Profile (LP bracket incl.)|
|Port Style||Integrated on Card|
|Industry Standards||PCI Express Base Specification 2.0|
|Chipset ID||Exar - XR17V352|
|Packaging Information||Package Height||30 mm [1.2 in]|
|Package Length||14.2 cm [5.6 in]|
|Package Width||17 cm [6.7 in]|
|Shipping (Package) Weight||171 g [6.0 oz]|
|Max Baud Rate||921.6 Kbps|
|Data Bits||5, 6, 7, 8|
|Flow Control||None, Xon/Xoff, RTS/CTS, DTR/DSR|
|Parity||Even, Odd, Mark, Space, None|
|Stop Bits||1, 1.5, 2|
|Surge Protection||15KV ESD|
|Physical Characteristics||Product Length||12.1 cm [4.8 in]|
|Product Width||18 mm [0.7 in]|
|Product Height||98 mm [3.9 in]|
|Weight of Product||59 g [2.1 oz]|
|Software||OS Compatibility||Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Linux 2.6.x to 4.4.x LTS Versions only
|Special Notes / Requirements||System and Cable Requirements||Available PCI Express slot|
|Available LP4 power supply connector (if additional power is required for connected devices)|
|What's in the Box||1 - Included in Package||PCI Express Serial Card|
|2 - Included in Package||Low Profile Brackets|
|1 - Included in Package||Driver CD|
Add a DB9 serial port to the rear panel of the computer
Turn a Motherboard IDC Serial Header into a Panel-Mountable 9-Pin RS232 Serial Connector
In stock: 123
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Check out our review guidelines.