Product ID: SATSASBAY3BK
The SATSASBAY3BK SAS/SATA Backplane offers an easy-to-use and cost-effective SATA hot swap solution and features a sturdy and compact 3-in-2 design that lets you install up to three 2.5"/3.5" SATA or SAS hard drives into only two 5.25in bays.
With support for SATA/SAS HDD the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
The SATSASBAY3BK is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||3 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||SATA (7 pin, Data)|
|2 - Host Connectors||LP4 (4 pin; Large Drive Power)|
|SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||0°C to 50°C (32°F to 122°F)|
|Storage Temperature||-15°C to 75°C (-59°F to 167°F)|
|Humidity||90% RH at 30°C|
|Hardware||Regulatory Approvals||UL94 V-0 Rated|
|Number of Drives||3|
|Drive Size||2.5in & 3.5in|
|Compatible Drive Types||SAS & SATA|
|1 - Fans||80 mm|
|Indicators||1 - LED Indicators||Over Heating Alarm (Flashing Red - Temperature Warring, Reset sensor and alarm)|
|3 - LED Indicators||Hard Drive Indicator (Green - Power, Orange/Red Blinking - Activity)|
|Packaging Information||Package Length||25.4 cm [10.0 in]|
|Package Width||12.3 cm [4.8 in]|
|Package Height||19.0 cm [7.5 in]|
|Shipping (Package) Weight||1.4 kg [3.2 lb]|
|Performance||Hot Swap Capability||Yes|
|Material||Aluminum and Steel|
|Product Length||20.2 cm [8.0 in]|
|Product Width||14.6 cm [5.7 in]|
|Product Height||8.6 cm [3.4 in]|
|Weight of Product||1.2 kg [2.7 lb]|
|Special Notes / Requirements||System and Cable Requirements||Two free 5.25" drive bays|
|3 x Available SAS or SATA ports|
|Note||If using SFF-8484 SAS controller for SAS Hard Drives, use StarTech.com SAS cable SAS84S450|
|What's in the Box||1 - Included in Package||SAS/SATA Backplane|
|Package of assemble screws|
Keep extra hard drives ready for use with the SATSASBAY3BK
In stock: 1
Power an IDE hard drive from a SATA Power connection.
In stock: 1270
Power a SATA device and an LP4 device from a single LP4 power supply connector
In stock: 5
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
In stock: 846
SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.
In stock: 2916
Connect and position SATA drives easily - designed for larger cases
In stock: 850
Make a right-angled connection to your SATA drive, for installation in tight spaces
In stock: 100
Add 2 external SATA (eSATA) and 4 internal SATA ports to your desktop computer through a PCI Express expansion slot
Connect a SATA/SAS Controller to 4 SATA drives
In stock: 9
When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive rack, it is recommended that you do the following:
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the hard drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
For further information about SAS and SATA interoperability, refer to the following FAQ: http://www.startech.com/faq/hard_drive_controllers_sas_drive_compatibility.